Search results

  1. B

    Hostetler 113in Super Chipmunk

    What weight cloth are you using?
  2. B

    Mithy's Green Flag SX w/WWW170

    One of my biggest regrets is that I have yet to own and fly a Comp ARF plane!
  3. B

    Hostetler 113in Super Chipmunk

    Very cool build thread! I always wanted to build the Goldberg Chipmunk.
  4. B

    Balsa USA Camel F1 Kit Build

    The GP MX or another one?
  5. B

    Tuning Changes with Elevation Question

    Good info guys! I realize that experiences may vary by engine and set up but I was trying to get a feel of what to expect and I got it.
  6. B

    Tuning Changes with Elevation Question

    Any guess as to how much engine tuning (I.E how far off the needles would be) would change from lets say 3000 ft. difference in elevation? I'm looking at getting back into IMAC. The contests I would be able to make are about 3000 ft. less in elevation than where I currently fly. So, are...
  7. B

    Sonic Cleaning and Nail Polish?

    I got a Walbro carb for a DLE 55 from Valley View. From what I read, people had a better experience with this carb on the 50+ cc engines and it's a direct replacement for what was in there. I'm going to work on a test stand to mount the motor to so maybe I can run it on Sunday or the following...
  8. B

    Sonic Cleaning and Nail Polish?

    Well, while removing the welsh plug I did a little damage near one of the ports on the carb on accident in the area covered by the welsh plug. Seeing as how Valley View has a Walbro replacement carb for the DLE 55 for $50. I'm just going to buy a new one and not worry about any of this.
  9. B

    Sonic Cleaning and Nail Polish?

    I'm about to get my Brillelli 60cc running again. I inspected the ring gap and I think it's acceptable (around 0.014"). When I rebuilt the carb (Walbro), I removed the welsh plug and put a new one in. I used nail polish around the edge per Walbro recommendation before finding out they don't...
  10. B

    New Engine Question

    Gas : oil is 40:1 Redline and I haven't checked the gap but I'm assuming it's OK. I will see about checking it. I fly it with the cowl on and I have a hole in the top of the cowl for tuning. On another note, when I click on a thread, it takes me to the beginning and not to he last post I...
  11. B

    New Engine Question

    Here are a couple pics from when I put the DA 60 on. I have since changed the choke to a bell crank set up.
  12. B

    Did FG just get rid of Sleepy?

    WoodisGood is on!
  13. B

    New Engine Question

  14. B

    New Engine Question

    No problem guys. I was just curious what the consensus would be if I should just fly it or try a prop with less load. I have laminated Xoar 23x8 and I'm going to drill it and try it just to see what it does.
  15. B

    New Engine Question

    I seem to be having a little trouble tuning my DA 60, which has less than a gallon through it. I'm using an ES Composites 55G pipe with the header DA recommended. Prop is a Mejzlik 24x10 and flying field is around 3800 ft. I think. High end sounds good but I can never seem to get rid of the...
  16. B

    Did FG just get rid of Sleepy?

    Glad I already have my TFC shirt!
  17. B

    Build: Dalton Extra 300

    Got the edges of one wing cleaned up. I will probably do the other one and start gluing some more LE and TE material on.
  18. B

    Build: Dalton Extra 300

    One side I butt joined them, the other is scarf. The scarf are SOOOO much easier....
  19. B

    Build: Dalton Extra 300

    I got a little time to work on the Dalton today. I've been working on another plane so I have something other than my Slick to fly. I got the stab repair close to done and it looks pretty good to me. Then I started working on cleaning up the excess balsa skin edges of the wings...
Top