Recent content by SENSEI

  1. SENSEI

    Monthly Pic

    Here is a couple of mine. Bob
  2. SENSEI

    100cc decathlon (pilot-rc)

    Now this is very cool!!! Bob
  3. SENSEI

    Hitec 7950Th jitters

    I see you placed your signal boosters at the servos, or at least it looks that way in the picture. I placed my signal boosters at the receiver, and the caps at the servos, so I don't know if this will help you or not my friend, but I sure hope so. Bob
  4. SENSEI

    Hitec 7950Th jitters

    Buddy, mine was just as bad but on mine, there were many times that the surfaces would jump and swing up to around 30 degrees of deflection with the trans sitting on the bench. That is all gone now though. Bob
  5. SENSEI

    Hitec 7950Th jitters

    I tried different radios, receivers, extensions, battery types, and voltage, nothing helped the jitters or random surface deflections until I placed line conditioners at the receiver ends of the extensions, and caps at the servos ends, after that ,all the problems went away. Bob
  6. SENSEI

    Hitec 7950Th jitters

    Did you get your caps on the extensions yet? If so, how did they work out for you? Bob
  7. SENSEI

    Aerotech 55% extra 260

    Just a couple more pictures before we head out. Bob
  8. SENSEI

    Aerotech 55% extra 260

    Here are a couple more pictures of Dan's 260, but it is time to set it aside and start packing up the 300 to head for Nall. :biggrin: Bob
  9. SENSEI

    Hitec 7950Th jitters

    :biggrin: Bob
  10. SENSEI

    Hitec 7950Th jitters

    That looks great, I also added one more larger dia. slice of shrink tubing to cover the entire mod. Bob
  11. SENSEI

    Hitec 7950Th jitters

    Yes, those are the ones. :biggrin: Bob
  12. SENSEI

    Hitec 7950Th jitters

    It did the trick in my application. There are two leads coming out of the capacitors, one ground and one positive, I cut the extension common and power wires, leaving the signal intact. I then tied the positive lead from the capacitor in line with the power and the ground with the common. Thats...
  13. SENSEI

    Hitec 7950Th jitters

    Hello Guys When I first finished my 52%er equipped with lipos direct and 7980s and powered it on for the first time, every surface jittered and jumpped as much as 30 degrees. I had never seen anything like this before so it freaked me out to say the least. So I started a complete systems...
  14. SENSEI

    Aerotech 55% extra 260

    The 260 is all sanded and ready to start covering this weekend. Bob
  15. SENSEI

    Aerotech 52% Extra 300 SP prototype build

    It was not me my friend, I have never been there before. Bob
Top