ScottZ

LATEST ACTIVITY

• Posted in thread: AMA send message to Clubs on 02/24/2011 at 9:23AM
  224th from New Jersey. Let's keep it going. We are a larger group of people than they think!

• Posted in thread: Hitec 7950Th jitters on 01/11/2011 at 7:46AM
  I have 10 of the 7950's on a 40% Yak and so far they are working fine. Jr 921rx, JR 9503tx, A123's
  unregulated and I think the key to them working right in my plane is the use of a Smartfly Pro PE whi...

• Posted in thread: Pro-Flow 3-D Canisters on 12/16/2010 at 9:39AM
  I tried running an L shaped Tygon tube right to the opening of the carb and made the top end very lean.
  My baffling in the cowl is the best one I ever made and don't have a problem with throttle chang...

• Posted in thread: Pro-Flow 3-D Canisters on 12/16/2010 at 4:18AM
  Father Don, In the past running the front carb nipple with a tube connected and going anywhere made the
  carb act worse. Are you suggesting that I may need something attached for this to work right? I ...

• Posted in thread: Pro-Flow 3-D Canisters on 12/15/2010 at 2:25PM
  I have Planebender's ProFlow's installed on a 40% TOC Yak with the notorious DA 170 and will test them in
  a few days. It's too cold and windy right now.

• Posted in thread: What oil??? on 12/13/2010 at 10:48AM
  Can you guys give me a heads up on next year's hot oil or do I have to wait? Stihl HP Ultra biodegrades
  by 80% in 21 days. I don't even know what that means ! Its right on thier website!

• Posted in thread: THUMBS, PINCH, STRAP, or GAY TRAY ? on 12/07/2010 at 11:39AM
  No strap-ons and I use my thumbs! Wait a minute,that didn't sound right!

• Posted in thread: 7950th servo signal booster on 12/05/2010 at 7:21AM
  I have a 40% TOC Yak with 4 56" leads and 10 7950's with no problem at all. I'm using a JR 9503Tx,JR
  921Rx, 2 A123 batteries through a Smartfly power expander with no regulator and fail on switches.No...

• Posted in thread: Starting over/Charger/Bateries/Reg on 12/05/2010 at 5:46AM
  Do any of these chargers work properly when charging 2 A123 packs at the same time through 2 ernst ports
  and in to a Smartfly pro Power expander. In the HK charger manual under warning and safety note...

• Posted in thread: Help with prop noise on 12/03/2010 at 11:18AM
  If you fly 3D and like the Vess props try the 32C for the 150. The 32B is very loud and the DA 170 goes
  well with the 32D . The 32D is too much prop for the 150