BillFromPerth

LATEST ACTIVITY

• Posted in thread: This is not a build thread! on 05/13/2012 at 4:25AM
  nice

• Posted in thread: EQ10 issue on 05/11/2012 at 6:16AM
  Firstly just about everyone i know that runs fasst rx's with any smartfly (most use the eq10 ) are
  running them on the hs frame rate with no problems.Ok now here is how the sf power expander works.pow...

• Posted in thread: EQ10 issue on 05/07/2012 at 4:42AM
  Are you offering to buy me a new 18mz ...suggar daddy :biggrin:can't even afford 1 for my self atm lol

• Posted in thread: EQ10 issue on 05/06/2012 at 6:48AM
  Bill , I think you are right on man. 2 receivers tested out with the same results and everything else has
  been eliminated....so it just has to be the transmitter.Here is what I just did.With three pro...

• Posted in thread: new replacement plane on 05/05/2012 at 11:49PM
  That's 1 sexy plane.

• Posted in thread: EQ10 issue on 05/05/2012 at 11:46PM
  Buttface 1 of the IMAC guys i fly with has a 10c with the eq10 and the bls157 servos in his extra 300
  with no problems at all, sounds like the hires signal from the tx to rx may be the problem and run...

• Posted in thread: Super's Pilot 40% Edge 540 Assembly on 05/05/2012 at 9:10PM
  All my parts came in yesterday. I did the wing first, as in sealing the hinge gap, installing some G10
  horns and then installing and setting up the servos and stuff. It is now in the wing bag and read...

• Posted in thread: EQ10 issue on 05/05/2012 at 9:07PM
  Honey i need a new transmitter this 1 is playing up and i don't want to risk my $10000 airplane with this
  faulty transmitter so i need a new 1 that's only $3000 now that's cheaper than losing a $10000...

• Posted in thread: EQ10 issue on 05/05/2012 at 9:04PM
  Dang I wish I had another transmitter to try right now! :banghead:Sounds like a good excuse for a new
  18mz :thumbsup:

• Posted in thread: Rated PG-13 "Not" on 05/04/2012 at 9:08AM
  ok a few here