TeamFlyingCircus - Giant RC Plane Forum > Sponsor Section > Sponsor Display > WrongWayRc 50 cc Laminar Profile


Help Support Team Flying Circus by donating using the link above or becoming a Supporting Member.
Reply
 
Thread Tools Display Modes
Old 12-26-2010, 03:40 PM   #11
Lectrictech
Senior Member
 
Lectrictech's Avatar
 
Join Date: Oct 2010
Location: Luray,VA
Posts: 137
Liked 1 Times on 1 Posts
Likes Given: 1

Default Re: WrongWayRc 50 cc Laminar Profile

I'm interested as well, keep us posted
Lectrictech is offline  
 
Reply With Quote
Old 12-29-2010, 11:02 AM   #12
topflight36
Hucking in Style
 
topflight36's Avatar
 
Join Date: Aug 2010
Location: Spring Hill Florida
Posts: 53
Default Re: WrongWayRc 50 cc Laminar Profile

I have flown Richards profiles and they are a ball. As soon as I get some time to build I will be owning one of these bad boys.
__________________
topflight36 is offline  
 
Reply With Quote
Old 12-29-2010, 12:44 PM   #13
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Here are a couple more vids... motor was new and not yet tuned. Weather was more calm then the wind in the vid posted in the beginning of this thread.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/n_AiNo3SKS4?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/n_AiNo3SKS4?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/x55JWNtIraA?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/x55JWNtIraA?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 12-29-2010, 12:54 PM   #14
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

I am waiting on a quote from the cutter on material.... So I have no listed price yet...

I can say that the short kits will not be as much as you think...because they will be ribs, plans and key cnc fuse/tail parts...

What will be required that is not in the short kit is all sheeting, all sticks, wing tube and receiver, fuse tubes....

I am looking at an option on the fuse tubes, those are easily accessible, the wing tube and receiver is what I have difficulty with. It is easier for the customer to get it straight from TNT along with the landing gear.

Does anyone have a line on phenolic wing tube on a manufacturer level? If I can make it reasonable I will look at offering it as an add in.
__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 01-26-2011, 06:07 AM   #15
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Hi again all.

Well I said January and her we are the 26th.

I will have an announcement tomorrow on pricing and content of the short kit. The short kits will be cut and the list to ship them out will be filled once I have my hands on them.
Attached Thumbnails
55ccsuk2.jpg  
__________________
Do it the Right Way
www.WrongWayRc.com

Last edited by WrongWay; 01-26-2011 at 06:07 AM. Reason: typo
WrongWay is offline  
 
Reply With Quote
Old 01-27-2011, 10:15 AM   #16
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Here are some pictures of the second prototype in the bones.

The short kit will have the same wing ribs, what will be different will be the interlocking 1/8 ply center section that carries to the light ply that gives rigidity all the way back to the tail. Also there will be interlocking 1/8 ply that carries forward to the nose/chin area of the plane.

The fuse gets it's strength from two 1/2 inch by 45 inch fiberglass tubes that will lock into the lite ply up to the back of the wings and carries forward in to the wing center section. Hardwood rails finish up the front to box out the center section for strength.

The plans are updated and the cutter gets the wood next week. I am anticipating the CNC parts to arrive here about the week of FX3D in Jax. (Feb 24) Shipping to customers is anticipated the week of March 1.
Attached Thumbnails
wing5.jpg   ailer3.jpg   fuse3.jpg   fuse4.jpg   Fiddy Fuse 002.JPG  

__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 01-27-2011, 10:18 AM   #17
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Short kit consists of;

Build plans
All CNC wing ribs
CNC ply wing center section
CNC ply fuse aft section
CNC Ply nose section

Below is what wood material is required to finish the plane. Also it requires a
1 1/4x36inch wing tube and receiver for the build. Fuse tube is .505x45inchx2 ea fiberglass tubes.

This is a big plane with 2030 square inches of wing and can be built out to sub 17 pounds.



4 - 3/8” x 3/4” x 48” (top and bottom fuse)

9 - 3/8” x 1/2” x 48” (4 for ron's, 1 for rudder, 4 for fuse)

13 - 3/8” Sq x 48” (4 for L/E and T/E, 1.5 for rudder, 4 for ele, 2 for tab and 1.5 for ron's)

4 - 1/4” Sq x 48” (4 for sub spars)

3 - 3/16” x 3/8” x 48” (1 for rudder, 2 for ron's and ele)

4 - 3/16” x 3/4” x 48” (3.5 needed for fuse, hard to get angals so 1/2 speair is ok)

4 - 1/8” x 3/4” x 36” (canopy)

8 - 3/32" x 3/8" (cap strips)

3 -3/32" x 1" (end cap strip)

7 - 3/8” Tri x 48” (1 for rudder, 4 for wing's, 2 for stab)

1 - 3/16” x 4” x 48" (wing tips)

14 - 3/32” x 4” x 48” (2 for T/E, 8 for L//E and sheer web's, 4 for center sheeting)

4 - 1/16” x 4” x 36” (stab sheet)

1 - 3/8” x 4” x 36” (gussets and stab)

1 - 1/2” x 4” x 36” (fuse core)

4 - 3/8” Sq x 48” hard wood (main spars)

1 - 1/4” Sq x 48” hard wood (fuse and wing servo rails) 1/4" x 3/8" will be better

2 - 3/8” x 1/2” x 48” hard wood (fuse core and stab joiner)

1 - 1/2” x 12” x 12” ply (landing gear block and firewall)
__________________
Do it the Right Way
www.WrongWayRc.com

Last edited by WrongWay; 06-30-2011 at 01:15 PM.
WrongWay is offline  
 
Reply With Quote
Old 01-27-2011, 10:22 AM   #18
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Regular price thereafter $149.99

We do Visa, Mastercard, Discover, Pay Pal.

Estimated USA Shipping $16 West Coast, $14 East Coast.

Finally a true 50cc profile that will delight anyone from beginner to advanced 3D.
__________________
Do it the Right Way
www.WrongWayRc.com

Last edited by WrongWay; 06-30-2011 at 01:16 PM. Reason: added the word estimated
WrongWay is offline  
 
Reply With Quote
Old 01-27-2011, 02:37 PM   #19
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Dang guys... the fellers on the pro bro site are eating these up like candy.

First shipment will likely be sold out before it gets here.

Gonna fly mine this weekend to remind me just how much fun it is.
__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 01-27-2011, 03:03 PM   #20
AJTACZ628
"HAMMER TIME"
 
AJTACZ628's Avatar
 
Join Date: Oct 2010
Location: Valrico Fl.
Posts: 555
Default Re: WrongWayRc 50 cc Laminar Profile

I think you should cut a 35 or 40% er
__________________





visit my channel
http://www.youtube.com/user/ajtacz62.../0/egNaeGLFKzI
AJTACZ628 is offline  
 
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Not your average profile 3DKid General Plane Discussion 12 04-10-2012 07:59 PM
126" AJ profile? BRUTUS Plane Kits & Frames 18 12-03-2010 04:54 PM
Aeroworks Profile 260 Gmoney Plane Kits & Frames 0 04-28-2008 08:43 AM



Newest Threads

LATEST SPONSOR DEALS