TeamFlyingCircus - Giant RC Plane Forum > Sponsor Section > Sponsor Display > WrongWayRc 50 cc Laminar Profile


Help Support Team Flying Circus by donating using the link above or becoming a Supporting Member.
Reply
 
Thread Tools Display Modes
Old 12-25-2010, 04:28 PM   #1
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default WrongWayRc 50 cc Laminar Profile

It is a Suhkoi and in stock.

Here are pictures of the second protype... Sorry no arfs here....just short kits..

Wingspan 80 1/2"
Length 79 1/2"
Wing Area 2035 Sq In
Engine power 50 to 60cc
Servos 4 plus throttle Minimum 250 in/oz
Weight 16 to 18 pounds depending on your building skill and component/engine selection.

Weight as flow, DLE-55, HS-5955 around except Throttle HS-225MG
16 lbs 4 oz dry, 17 lbs wet with 11 oz hayes fuel tank, A123-2300 power, JC Super Prop 23x7, 50cc single bolt prop adapter, TNT landing gear, 3.75 in dubro foam wheels...Aeroworks CF Tailwheel, Rcexl Opto Isolated Kill Switch, Rcexl inline Digital Tach, Fromeco Badger pin switch

The short kit l consist of CNC wing ribs, key fuse CNC parts and building plans...price $149.99, plus shipping..

Options that can be added include 1.25x36 inch wing tube and receiver $32
Two Fiberglass fuse tubes needed for build $18 total.
Custom TNT profile landing gear designed for this plane $46

What you need...

All Sheeting and sticks to frame out plane.
1.25 x 36 inch wing tube with tube receiver,
two 1/2 x 45" fiberglass fuse tubes
All Hardware, landing gear, wheels etc etc.
__________________
Do it the Right Way
www.WrongWayRc.com

Last edited by WrongWay; 05-26-2011 at 04:25 PM. Reason: Update info
WrongWay is offline  
 
Reply With Quote
Old 12-25-2010, 04:33 PM   #2
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Some pictures from today when we got new graphics on Proto #2
Attached Thumbnails
P1000036(1).jpg   P1000119(1).jpg   P1000117(2).jpg   P1000116(1).jpg   P1000121(2).jpg  

__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 12-25-2010, 04:34 PM   #3
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

The weatherman lied...was supposed to be 6-8 mph wind...The 50cc works the 20 just fine..


__________________
Do it the Right Way
www.WrongWayRc.com

Last edited by WrongWay; 06-30-2011 at 01:29 PM.
WrongWay is offline  
 
Reply With Quote
Old 12-25-2010, 04:43 PM   #4
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

Flight two from Christmas Day....what a gift I got!!

Edit, see above.
__________________
Do it the Right Way
www.WrongWayRc.com

Last edited by WrongWay; 06-30-2011 at 01:30 PM.
WrongWay is offline  
 
Reply With Quote
Old 12-25-2010, 06:15 PM   #5
roc111672
3D Farm Bartender
 
roc111672's Avatar
 
Join Date: Apr 2008
Location: Where ever my buddies are .
Posts: 7,554
Liked 334 Times on 276 Posts
Likes Given: 39

Default Re: WrongWayRc 50 cc Laminar Profile

Sweet plane , if it was an arf I would have to have it .
roc111672 is offline  
 
Reply With Quote
Old 12-26-2010, 01:25 AM   #6
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

No, wont be any Chinese on these..sorry.

FYI, the plane in the vid was built and covered in 4 days....it then took a day to stuff it with servo's engine radio and setup. They can be built pretty quick...
__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 12-26-2010, 05:23 AM   #7
roc111672
3D Farm Bartender
 
roc111672's Avatar
 
Join Date: Apr 2008
Location: Where ever my buddies are .
Posts: 7,554
Liked 334 Times on 276 Posts
Likes Given: 39

Default Re: WrongWayRc 50 cc Laminar Profile

Quote:
Originally Posted by WrongWay View Post
No, wont be any Chinese on these..sorry.

FYI, the plane in the vid was built and covered in 4 days....it then took a day to stuff it with servo's engine radio and setup. They can be built pretty quick...
Sorry i didnt mean to step on any toes when i said if it was an arf i would have to have it . I am just not interested in building .
roc111672 is offline  
 
Reply With Quote
Old 12-26-2010, 05:57 AM   #8
WrongWay
Senior Member
 
WrongWay's Avatar
 
Join Date: Apr 2008
Location: Florida
Posts: 4,233
Liked 131 Times on 122 Posts
Likes Given: 170

Default Re: WrongWayRc 50 cc Laminar Profile

No toes, no worries.....I confess, I had to have someone build it for me....If I ever get things in order I will start building again as well...Then there will be ARF's...!!!
__________________
Do it the Right Way
www.WrongWayRc.com
WrongWay is offline  
 
Reply With Quote
Old 12-26-2010, 07:10 AM   #9
Revy
K, letsgo!!
 
Revy's Avatar
 
Join Date: Oct 2010
Location: Revelstoke, BC
Posts: 1,966
Liked 64 Times on 54 Posts
Likes Given: 483

Default Re: WrongWayRc 50 cc Laminar Profile

Thats kewl....when will the short kits be ready? Looks like an awesome beater bird!
Revy is offline  
 
Reply With Quote
Old 12-26-2010, 10:36 AM   #10
Pakratt76
It can only get better!
 
Pakratt76's Avatar
 
Join Date: Mar 2010
Location: Clyde, OH
Posts: 1,985
Liked 11 Times on 8 Posts
Likes Given: 77

Default Re: WrongWayRc 50 cc Laminar Profile

Awesome! I've still got my eye on this one!!!
Pakratt76 is offline  
 
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Not your average profile 3DKid General Plane Discussion 12 04-10-2012 07:59 PM
126" AJ profile? BRUTUS Plane Kits & Frames 18 12-03-2010 04:54 PM
Aeroworks Profile 260 Gmoney Plane Kits & Frames 0 04-28-2008 08:43 AM



Newest Threads

LATEST SPONSOR DEALS