[RacerBob]

I guess I am just not as concerned as Dean is about rx and battery failure.
I just like to build things, it may be old technology but it works and was a challenge to get correct.
I am using Quest stuff and will post pix tomorrow.

The cowl is a pain but I will survive it, The biggest problem is the paint is a lot more orange than the Cub Yellow, not very close

I hope to work on the glider tow mount tomorrow unless I go flying.

[IMACmike]

I have a 15 meter glider that you could try towing...

[10+]

That monster might be able to tow full scale!

[Mithrandir]

Originally Posted by 10+

That monster might be able to tow full scale!

Wouldn't that be bad ass....?!?!?!?!!?

[RacerBob]

Back again


Can't get the big clip in only a small paper clip, so now I have removed the pin and ground the back side of the glass thinner and reinstalled the thing, A PAIN


Baffle installed

[RacerBob]

More yet





Color match not so good

[RacerBob]

Last today




My sailplane hanging upside down

[RacerBob]

Once I get the inside done the next big problem in installing the wing struts, i need to take it outside and turn it upside down then install the things (the book says so).
I do have a lot to do inside at this time.
I am still waiting for the cannisters.

[kim]

bob your going to have fuin with that thing my dad love bill 50% he got him self the 50% edge so we can fly formation in fresno if ill get mine done

[RacerBob]

I made the glider tow fitting but did hot like it after installing, I will make a new one today


Throttle servo

Headers awating cannisters

Power tray